Shuilang fountain equipment company introduces the installation of fountain equipment:
1. The connection of the fountain cable must be carried out without water, and waterproof tape, insulating tape and high-voltage insulating tape shall be used for three-layer protection.2. The underwater lamp replacement of the fountain must be carried out without water and the bolts should be firmly fastened.
Inspection of fountain equipment
Inspection of underwater lamp: the underwater lamp of the fountain shall check and tighten the loose screw once a month to avoid the short circuit fault caused by the water entering the lamp body.
Inspection of cables: the cables not in water shall be inspected once every six months to check the aging condition and avoid unnecessary loss.
Inspection of sprinkler head: in order to ensure the beauty and consistency of fountain water type, the fountain head with variable Angle should be reset at any time. It is forbidden to use sharp objects to knock when resetting, so as to prevent the damage of sprinkler head.
Testing of fountain appliances: the fountain equipment shall be maintained regularly, and the vulnerable equipment in the cabinet shall be inspected and maintained for half a year. The maintenance and repair of electrical equipment should be carried out under the condition of power off. In case of special circumstances, when electrified operation is required, safety protection measures should be taken, and special personnel should be set up for the important parts.
Cleaning of fountain equipment
Cleaning of fountain water pump: the water suction of fountain water pump should be cleaned every month to prevent dirt from blocking the suction port, reducing the efficiency and even causing equipment damage. The submersible pump must release the cooling water during the winter shutdown to avoid ice damage to the pump body. The oil coolant pump needs to close the valve.
Cleaning of fountain pipes: once a year. The water in the pipe should be drained before the fountain equipment is stopped in winter to prevent the pipe from frostbite.
Cleaning of fountain nozzle and underwater lamp: once every half a year. Pay attention to nozzle standpipe and underwater color lamp when cleaning to prevent damage.
Well, you know what? It is worth paying special attention to the maintenance in winter. It is important to keep the water clean during the shutdown to avoid freezing the pump body.
